The Intelligent Relay Bypass Module is a new product for 2020. It includes a Relay Bypass PCB and a pre-programmed microcontroller. The module does not come with a footswitch, relay, or other components.

One of the main features of this module is its use of a latching relay, which helps to reduce power consumption. The PCB input is grounded in bypass mode to minimize noise.

The module has three different modes of operation. In the Instant Momentary Mode, tapping the footswitch toggles between active and bypass modes, which is the standard operation. Holding down the footswitch while the pedal is bypassed momentarily activates the effect until the footswitch is released. Holding down the footswitch while the pedal is activated momentarily bypasses the effect until the footswitch is released.

The module also has an Auto Power-On Mode, which automatically engages the pedal when power is applied. This is useful for rack-mounted setups or when used with a loop bypass system.

Lastly, the module has a Channel Switching Mode, which is designed for use in multi-effects combination pedals. In this mode, only one effect can be active at a time. Pressing any footswitch automatically activates that effect and bypasses any other active effect on the same control bus. Pressing the active footswitch again bypasses the effect.

Summary created by AI from the original source.