The threshold control sets the level of the signal that will be affected by the noise reduction. The higher the threshold, the more noise will be reduced.

• RELEASE

The release control sets the time it takes for the noise reduction to return to its original level after the signal has dropped below the threshold.

• MIX

The mix control sets the balance between the dry signal and the noise-reduced signal. Noise Terminator is a noise reduction board designed to get rid of unwanted noise. It features an innovative approach to tracing the envelope of the input signal, allowing it to respond to both fast decaying notes and long sustained notes. It can be inserted at the end of a chain of existing pedals or in the effects loop of an amplifier to reduce noise present at the input and in the pre-amp section. The board has three controls: Threshold, Release, and Mix. The Threshold control sets the level of the signal that will be affected by the noise reduction. The higher the threshold, the more noise will be reduced. The Release control sets the time it takes for the noise reduction to return to its original level after the signal has dropped below the threshold. The Mix control sets the balance between the dry signal and the noise-reduced signal. Noise Terminator is a great solution for eliminating unwanted noise. It offers a transparent, highly performative way to reduce noise and is capable of responding to both fast and slow notes. With its three controls, it is easy to adjust the board to the desired settings.

Summary created by AI from the original source.